Service Details

  • Home
  • Service Details

Mug 3rd party inspection:


The QC check inspection for drinking mugs for water, beer, beverage, travel made of ceramics or porcelain or glass listed as below:

INSPECTION CHECKPOINTS RESULTS COMMENTS
A. Quantity check OK
B. Shipping marks & packing OK
C. Label, logos and colors OK
D. Styles & measurements NOT OK
E. Onsite safety and function tests NOT OK
F. Special requirements OK
G. AQL workmanship
(Visual defects)
OK

The third party mugs inspections will be:

mug 3rd party inspection

Please find below for a mug quality inspection checklist:

ONSITE INSPECTION CHECK LIST COMMENTS RESULT
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) N/A
Lab certified.(询问工厂提供相关测试证书如SGS) PASSED
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 PASSED
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons
Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order)
PASSED
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) PASSED
Smell check-check if there are any strong offensive odor-II N/A
Scan test for barcode label PASSED
Capacity check -S1容量测试
根据客人不同产品要求,对应容量测试
--陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml
--Motta Milk Pitcher Volume: 750ml
--Italian Expresso Jug Volume: 70ml
PASSED
Make sure the logo are correct positioned conform
Image(不同角度的全景)
N/A
Leakage water test for hot water and cold water-S4 PASSED
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 FAILED
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) N/A

preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x