Service Details

  • Home
  • Service Details

Coffee cup Inspection Services:


Coffee Cup quality inspection services preshipment QC check on-site factory third party

For coffee cup inspections, the checks will normally be for visual defects, and decal quality, we will also check the packing, gift box printing etc as below:

INSPECTION CHECKPOINTS RESULTS COMMENTS
A. Quantity verify OK
B. Shipping marks & packing OK
C. Labels, logos and colors N/A
D. Styles & measurements OK
E. Onsite safety and function tests OK
F. Special requirements OK
G. AQL workmanship
(Visual defects)
OK

The on-site QC inspections for coffee cups are mostly as below:

coffee cup Inspection Services

As an example of a pre-shipment inspection for coffee cups in-line tests:

INSPECTION LIST COMMENTS RESULT
Capacity check -S1容量测试
根据客人不同产品要求,对应容量测试
--陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml
--Motta Milk Pitcher Volume: 750ml
--Italian Expresso Jug Volume: 70ml
PASSED
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons
Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order)
FAILED
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) PASSED
Smell check-check if there are any strong offensive odor-II PASSED
Make sure the logo are correct positioned conform
Image(不同角度的全景)
N/A
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) PASSED
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 PASSED
Lab certified.(询问工厂提供相关测试证书如SGS) PASSED
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) PASSED
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 PASSED
Leakage water test for hot water and cold water-S4 PASSED
Scan test for barcode label PASSED

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x