Service Details

  • Home
  • Service Details

Coffee cup inline inspection:


For coffee cup inspections, the checks will normally be for visual defects, and decal quality, we will also check the packing, gift box printing etc as below:

INSPECTION CHECKPOINTS RESULTS COMMENTS
Product specs, and special requirements verifying OK
Aesthetic, visual defects, workmanship, surface and function inspections OK
On-site safety, regulation & function tests N/A
Quantity & assortment verifications OK
Measurements & sizes checks N/A
Packaging, safety and drop tests onsite OK
Labels, markings, logos & barcodes checks OK

The on-site QC inspections for coffee cups are mostly as below:

coffee cup inline inspection

As an example of a pre-shipment inspection for coffee cups in-line tests:

ONSITE CHECK LIST COMMENTS RESULT
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) N/A
Lab certified.(询问工厂提供相关测试证书如SGS) N/A
Leakage water test for hot water and cold water-S4 N/A
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 PASSED
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) PASSED
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons
Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order)
PASSED
Capacity check -S1容量测试
根据客人不同产品要求,对应容量测试
--陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml
--Motta Milk Pitcher Volume: 750ml
--Italian Expresso Jug Volume: 70ml
FAILED
Smell check-check if there are any strong offensive odor-II PASSED
Scan test for barcode label FAILED
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 N/A
Make sure the logo are correct positioned conform
Image(不同角度的全景)
PASSED
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) N/A

3rd party preshipment products goods factory onsite final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x