Service Details

  • Home
  • Service Details

Glove pre-shipment inspection:


Checkpoints for Latex Glove Quality Pre-shipment inspections:

  • Smell check-check if there are any strong offensive odor-II
  • Scan for UPC barcode label and master barcode-S4
  • Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)
  • For adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2
  • Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: ......nd they shall show no curling-S2
  • Perform a strength check.-Test all connections using normal force.-II
  • Minimum breaking tenacity test-S2 (>7.0 N)
  • Minimum value for elongation at failure test-S2 (>600%)
  • Water leakage test-S2(Must be filled with water for leak testing,check 13pcs with water and other will air leakage for each size)
  • Check Powder content (7-9 mg/dm2)
  • They should be opening easily with only 1 finger
  • The main issue is the gloves should not be teared during wearing or holding it strong-S4
  • Try wearing gloves and application testing-S4
    (the inspector should be sure that they do not tear when wearing.)
  • hand feeling and elasticity Check--II
glove pre-shipment inspection

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x