Service Details
- Home
- Service Details
To inspect pedometer for keeping track of your steps and health monitoring onsite inline, our QC checks will verify the below quality points to make sure the products are acceptable, and send you a full inspection report in 24hrs after the inspection:
The AQL QC inspections for pedometers are mostly called:
Please find below for a sample factory QC check points for pedometers:
ON-SITE INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
- Function test: 1/ Power ON/OFF function test 2/Led indicator light function test 3/ Other function test claimed on gift box and instruction manual-should not have malfunction |
PASSED | |
Test the battery compartment.-Make sure the correct battery size for the item can fit in the item’s battery compartment. -S1 | PASSED | |
Check all accessories with the item. -The item should not be missing any parts and all items should perform their functions properly. -II | PASSED | |
Perform an endurance/life test--S1 | PASSED | |
Perform a rub test and adhesive test for all markings, logos, printing & labels found.-Rub the rating label for 15 seconds with water, then for 15 seconds with petroleum spirits. If petroleum spirits is not available, use alcohol. Use 3M tape for the adhesive test on the silk-screening and painting.-S1 | N/A | |
Perform an internal check. -Take a photo to show all that the item contains all the components specified by the client. Also make a list of all of the item’s main electrical parts. A. Internal wiring shall be routed to provide sufficient creepage and clearance distances, avoid being trapped and be free from damage to the insulation.B. All screws shall be present, fully tightened with no damage to the heads and anti tamper screws used as appropriate. Request at least one picture to show the whole construction of product. -S1 |
PASSED | |
Perform a fatigue test for all adjustable parts. -Do this 20 times.- S1 | PASSED | |
Perform a barcode scanning test. -The barcode should be scannable and have the correct number. -S2 | FAILED | |
- Check vibration and sound:-in normal mode (time mode) push Reset and Start buttons together . You will hear a sound. Next turn swith on the downside to the vibration mode. And push Reset and Start buttons together one more time. You will feel vibration.-II |
PASSED | |
Perform a stability test -On a surface inclined to 10 or 15 degrees. The item should not tip over.Please take clear picture to show that the product is in the most unfavourable position on the inclined plane. (If applicable) -S1 | PASSED | |
Polarity check & battery fitness check with batteries - A.Voltage check if battery included: please write down the detail of findings, percentage failed, range of findings etc. B. check the charge and discharge time of the baterry and ensure the rated energy stored is correct. C. Check the battery is out of date or not- Report the battery production date (or expired date) or take the picture which can shows the date. D. Check plastic strip that prevent the battery to discharge is whether exist or not if applicable Please write down all results of this check (i.e. percentage failed, range of results, etc.).-S1 |
PASSED | |
Perform a carton drop test: 10 drops from the correct height based on carton weight as defined in ISTA 1 A(6 faces, 3 edges,1 corner) - On 3 cartons – packed products should not get damaged | N/A | |
Check plastic strip that prevent the battery to discharge is whether exist or not if applicable-II | FAILED |
Pedometer QC check in China, Pedometer third party QC check, China Pedometer QC check services, China Pedometer third party QC check services, China Pedometer QC check, Pedometer 3rd party QC check services in China, Pedometer 3rd party QC check, Pedometer third party QC check in China, Pedometer third party QC check services, Pedometer 3rd party QC check in China, China Pedometer 3rd party QC check, Pedometer third party QC check services in China,
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.