Service Details
- Home
- Service Details
For footwear quality inspection services, there are:
An examples of the footwear inspection checklist fyi:
I. TESTS AND SPECIAL REQUIREMENTS | ||
---|---|---|
Test description | Findings | Result |
Heel flex test | On 8 pairs | Passed |
Nails and sharp component check | On all samples | Passed |
Production Process Check | No staple | Passed |
Sole bond test | On 8 pairs | Passed |
Assortment Check - Check Pairage against the packing list printed on side of carton and total quantity of order to be confirmed |
Same as printing on carton mark | Passed |
Back Seam Check - Back seam or back strap/panel to be straight and centered Do not fail this test. Just need to remark in red and record all defects in the defectives list. |
On all samples | |
Pull test Pull on zips, buckles, trims, shoelaces, snaps, Velcro, buttons… If no pull gauge, you must pull them by hand. |
The tongue was stitched | Passed |
Packing Check - All footwear to be packed in polybags separated by cardboard partitioning (egg pack) |
Refer to pictures below | Passed |
Hanger Check - Hanger type and quantity as per purchase order requirements |
No hanger | N.A |
Barcode scanning test and price check as per purchase order | Refer to pictures below | |
Smell test | On 8 pairs | Passed |
Rub test / color fastness test | On 8 pairs | |
Wear test or fitting test: Put on your size shoes with sock liners |
No model | N.A |
Creases Check Put your hands inside the shoe to check for proper counter shape, wrinkles, and a smooth surface in the lining area. |
On all samples | |
Sockliner check: | On all samples | Passed |
1. Check the sock fit well with shoe. It should not be too big or small result in not fit with the shoe (wrinkles on sock or gap between sock and heel or toe). | On all samples | Passed |
2. Socks must be firmly attached from seat to toe (or the whole sock must be firmly attached), and sock must not lift on all Mr. Price footwear. | Not applicable | N.A |
3. If any of shoes not comply with above standard, please also count them as Major issue besides failing the test. | Not applicable | N.A |
Label attachment: - This test is for products with labels sewed on the sock or lining. |
Not applicable | N.A |
Seat piece strength/ position Check the strength of the adhesive used. ..... Check also the position of the seat filler “uniform position” |
Not applicable | N.A |
Toe Post Pulling Test If no pull gauge, you must pull them by hand. |
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.