Service Details

The professional independent 3rd party quality QC for Safe QC control, candle QA inspection, shelf quality assurance services, scaffolding quality inspections, shopping cart QC checks, earphone quality examining in Wuxi & Jiangxi will check as follows:

• Labels, markings, logos & barcodes quality check
• Packaging, safety and drop tests onsite
• On-site safety, regulation & function testing
• Product specs, and special requirements check
• Aesthetic, visual defects, workmanship, surface and function inspection
• Quantity & assortment verifying
• Measurements & sizes check

The third party onsite preshipment inspections have:

• Factory Audit and Social Audit
• Random Product Sampling
• Production Monitoring
• DUPRO Inspection
• Initial Production Check
• Container Loading Check (CLC)
• Pre-Shipment Inspection
• Final Random Inspection

The general checklist for this line of products:

• Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3cartons
• Smell check-check if there are any strong offensive odor-II
• For 3M Tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2
• Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not available, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S1
• Colorfastness Test
  Use a piece of white fabric & rub the surface of product.After rubbing , no product color should leak on white fabric –S1 (when textile or seamed item)
• Perform a barcode –scanning test The barcode should be scannable and have the correct number. (-S3)
• Loading test
  For bag :Put about 10 KG in the bag ,make sure the bag，handle and buckledoes not break through the weight-S1
• Pull testing (when textile or seamed item)-S1
• Check the seam strength on each Part/pocket ,especially on the Handle or shoulder strap.-II
• Count and record the number of stitches per inch-S1 (when textile or seamed item)
• Perform assemble and function check(Must normal function and No sharp point &Edge) -S1
• Perform a moisture content test on all wooden parts.-By check 3 points per pc and take the average date: (a+b+c)/3. The moisture content should be within 8-12%.-S3
• Velcro test-II
• Perform an application inspection-S1
• Waterproof test-S1
  

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.