Service Details
- Home
- Service Details
The shipment final inspection types are:
An example of the on-site Tests during the furniture Quality inspections:
CHECK LIST | COMMENTS | RESULT |
---|---|---|
Assembly check - Follow product instruction and ease for assembly- 2pcs per item |
PASSED | |
Humidity check-S1 -Check 3 points per pc and take the average data :(a+b+c)/3. For indoor products shall be within 7%-12%; For outdoor products shall be within 8%-14% |
PASSED | |
Static loading test for chair-S1 - 300lbs per seating for 1 hour. No obvious deformation |
N/A | |
Stability test- 2pcs per item - Put unit onto a 10 degree incline, and rotate 360° slowly, cannot tip over. |
FAILED | |
Wobble test-II - Place samples onto a flat glass surface, no wobble. |
PASSED | |
Finger Entrapment (if applicable).-S1 - The acceptable safety space should smaller than 1/4 inch or bigger than 1/2 inch. Then the finger will not be harmed. |
PASSED | |
Leg Strength (Front / Side).- S1 - 75 lbs. applied to the leg at 1 In. From the end of the leg. Force is applied in four directions (forward, rearward, side and side). |
PASSED | |
Durability Of Folding Mechanism (If Applicable)-S1 - The chair shall be opened and closed as intended for 3 cycles. |
PASSED | |
All accessories check-II - Based on parts list on instruction sheet, no missing. |
PASSED | |
Carton drop test- 1 carton each item One corner, three edges, six sides, at height of 30inch (﹤9.5kg) 24inch (9.5kg~18.6kg) 18inch (18.6kg~27.7kg) 12inch (27.7kg~45.3kg) 8inch (45.3kg~68kg) on the cement floor |
PASSED | |
Loading check-S1 - Test load is applied distributed on the surface. Test load based on sq. ft. not to exceed 200 lbs. > 4 sq. ft., 10lbs. / sq. ft.; < 4sq. ft., 20lbs. / sq. ft. Max. 1/4 in deformation or no malfunction in any component |
PASSED | |
Stability test-S1 - Test load is applied 1 In. from the edge on 12 In. disc. > 4 sq. ft., 50lbs. < 4sq. ft., 40lbs. Max. 1/4 in deformation or no malfunction in any component. |
PASSED | |
Drop Impact Test (for table)-S1 - One end of table is dropped from a height of 10 In. |
PASSED |
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.