Service Details

  • Home
  • Service Details

Preshipment Inspection > Shunde Foshan Furniture Sofa Cabinet Office Chair Rattan Bed Wheel Patio Park Bench Freezer Cooler Refrigerator fridge Icebox Gas stove Couch Foshan Shunde

Shunde Foshan is thriving with its furniture industry, WeCheck CTS offer furniture pre-shipment quality inspection in the area, and there are below types of inspections we do:

The QC inspections will check:

  • Aesthetic, visual defects, workmanship, surface and function check
  • Labels, markings, logos & barcodes check
  • Packaging, safety and drop tests
  • On-site safety, regulation & function testing
  • Product specs, and special requirements check
  • Measurements & sizes check
  • Quantity & assortment verifying
Shunde Foshan Inspections

An example of the on-site Tests during the furniture Quality inspections:

Assembly check
- Follow product instruction and ease for assembly- 2pcs per item
Humidity check-S1
-Check 3 points per pc and take the average data :(a+b+c)/3.
For indoor products shall be within 7%-12%;
For outdoor products shall be within 8%-14%
Static loading test for chair-S1
- 300lbs per seating for 1 hour. No obvious deformation
Stability test- 2pcs per item
- Put unit onto a 10 degree incline, and rotate 360° slowly, cannot tip over.
Wobble test-II
- Place samples onto a flat glass surface, no wobble.
Finger Entrapment (if applicable).-S1
- The acceptable safety space should smaller than 1/4 inch or bigger than 1/2 inch. Then the finger will not be harmed.
Leg Strength (Front / Side).- S1
- 75 lbs. applied to the leg at 1 In. From the end of the leg. Force is applied in four directions (forward, rearward, side and side).
Durability Of Folding Mechanism (If Applicable)-S1
- The chair shall be opened and closed as intended for 3 cycles.
All accessories check-II
- Based on parts list on instruction sheet, no missing.
Carton drop test- 1 carton each item
One corner, three edges, six sides, at height of
30inch (﹤9.5kg)
24inch (9.5kg~18.6kg)
18inch (18.6kg~27.7kg)
12inch (27.7kg~45.3kg)
8inch (45.3kg~68kg) on the cement floor
Loading check-S1
- Test load is applied distributed on the surface. Test load based on sq. ft. not to exceed 200 lbs.
> 4 sq. ft., 10lbs. / sq. ft.;
< 4sq. ft., 20lbs. / sq. ft.
Max. 1/4 in deformation or no malfunction in any component
Stability test-S1
- Test load is applied 1 In. from the edge on 12 In. disc.
> 4 sq. ft., 50lbs.
< 4sq. ft., 40lbs.
Max. 1/4 in deformation or no malfunction in any component.

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.