Service Details

  • Home
  • Service Details

Preshipment Inspection > for Machinery Machine Spare Part Raft Crane Car Truck Boat Forklift Winch


The 3rd party QC Check Inspections for Machineries, Machines, Machine Spare Parts, Rafts, Crane, Cars, Truck, Boats, Forklifts, and Winches normally would be Final Inspections. However, we can also offer:

We have a fixed format for checking this type of equipment:

  • Quantity & assortment verifying
  • Labels, markings, logos & barcodes check
  • Aesthetic, visual defects, workmanship, surface and function check
  • Product specs, and special requirements check
  • Packaging, safety and drop tests
  • On-site safety, regulation & function testing
  • Measurements & sizes check
Machine Inspections

Please find below for an example of the pre-shipment inspection checklist for a machine:

CHECK LIST COMMENTS RESULT
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 PASSED
Check if the base of the item wobbles, It is to be placed on the inclined plane of 15 degree to the horizontal and turned to a position that results in tip over.(15度斜度板, 15度不过,做8度) –II PASSED
Pull test on the power cord.
-EN Standard-Pull 25 times for 1 minute.  If the item’s net weight <= 1 kg, use 30N of force.  If the item’s net weight <= 4 kg, use 60N of force.  If the item’s net weight > 4 kg, use 100N of force - The cord should not move more than 2mm from its original position.
-UL Standard- A 35 pound(16kg) weight is to be super 1 minute.
Afterthe test :
-Insulation of cord shall not damage
-Cord displacement shall <1.6mm.
S1 (5 Pcs) 1牛顿=0.225磅力 1磅力=4.45牛顿
N/A 
Perform a Hi-Pot test-Perform a Hi-pot test -II--UL (1500V 0.5 mA 3S)   FAILED
*S*: Perform an Earth Continuity Test only for class I products-Maximum 0.5 Ohm (EN)/0.1 Ohm (UL)resistance.-II FAILED
Check the power cord lenth and VDE mark-S1 FAILED
Perform a life test.-Continue to run this test during the whole inspection period.-S1 PASSED
Perform function test.-II PASSED
Perform a barcode scanning test.-The inspector must scan the barcode.  The numbers found after scanning must match the numbers below the barcode.-S2 (8 Pcs) PASSED
Perform an all-accessories check.-Check all the accessories with the item. All accessories should be included.-II PASSED
Perform an internal check.-Take all related pictures to show special requirements.-S1 PASSED
If is the original wood products and packaging materials, please check the humidity and ask the factory to provide fumigation certificate.-S1 PASSED

3rd y preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third y on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x