Service Details
- Home
- Service Details
For coffee cup inspections, the checks will normally be for visual defects, and decal quality, we will also check the packing, gift box printing etc as below:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Measurements & sizes inspections | OK | |
Packaging, safety and drop tests onsite | N/A | |
Aesthetic, visual defects, workmanship, surface and function inspections | NOT OK | |
Product specs, and special requirements verifications | N/A | |
Quantity & assortment checks | OK | |
Labels, markings, logos & barcodes QC check | OK | |
On-site safety, regulation & function tests | OK |
The on-site QC inspections for coffee cups are mostly as below:
As an example of a pre-shipment inspection for coffee cups in-line tests:
ON-SITE INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) | PASSED | |
Smell check-check if there are any strong offensive odor-II | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | PASSED | |
Scan test for barcode label | PASSED | |
Leakage water test for hot water and cold water-S4 | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 | N/A | |
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) | PASSED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order) |
PASSED | |
Make sure the logo are correct positioned conform Image(不同角度的全景) |
PASSED | |
Lab certified.(询问工厂提供相关测试证书如SGS) | N/A | |
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) | FAILED | |
Capacity check -S1容量测试 根据客人不同产品要求,对应容量测试 --陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml --Motta Milk Pitcher Volume: 750ml --Italian Expresso Jug Volume: 70ml |
N/A |
coffee cup third party preshipment QC, China coffee cup third party preshipment QC services, coffee cup 3rd party preshipment QC services, coffee cup 3rd party preshipment QC, coffee cup third party preshipment QC in China, coffee cup preshipment QC services in China, China coffee cup 3rd party preshipment QC services, coffee cup preshipment QC services, coffee cup third party preshipment QC services in China, coffee cup 3rd party preshipment QC services in China, China coffee cup third party preshipment QC, China coffee cup 3rd party preshipment QC, coffee cup preshipment QC in China, coffee cup third party preshipment QC services, China coffee cup preshipment QC services, China coffee cup preshipment QC, coffee cup 3rd party preshipment QC in China
3rd party products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.