Lang

Service Details

  • Home
  • Service Details

Power tool 3rd party inspection:

The Product Quality Pre-shipment Inspections for Power Tools, Power Drills, Cement Mixers, Concrete Cutters, Glass Cutters, Grinders, Hammers, Polishers, and Hammers etc.:

How to do Quality Pre-shipment Inspections for Power Tools?

INSPECTION CHECKPOINTS RESULTS COMMENTS
Measurements & sizes inspections OK
On-site safety, regulation & function tests OK
Aesthetic, visual defects, workmanship, surface and function checks OK
Product specs, and special requirements verifications OK
Packaging, safety and drop tests onsite OK
Labels, markings, logos & barcodes quality check OK
Quantity & assortment checks OK

The onsite quality check for power tools we have:

Power tool 3rd party inspection

The quality inspections for power tools will be like below:

ONSITE CHECK LIST COMMENTS RESULT
Perform a normal function test. .-II FAILED
Perform the standard power test-II. N/A
Run the test work for 4 hour ----S2 PASSED
PLUG& Power Cord view-S2 PASSED
Perform a strength check.-Test all connections using normal force.-II PASSED
perform quantity and assortment check in each package--S1 FAILED
Power cable Size 4m for all item-S2 PASSED
Other test FAILED
.Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)
The Carton should fall down At 61cm height without damage-S1		 PASSED
Leakage current test--II N/A
Check if the base of the item wobbles by placing it on a flat, glass surface--II N/A
Perform a fatigue test for all adjustable parts:
Do this 20 times for assemble and sand paper on tool head –
There should be no damage to the item. ----S2		 PASSED
Perform a voltage range test -II (额定电压的+-10%) PASSED
Perform a barcode –scanning test .The barcode should be scannable and have the correct number for all barcode label. (-S3) PASSED
No load speed:（额定电压的空载转度）—S2 PASSED
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling. N/A
Perform an assembly test. PASSED
Power consumption test-The voltage input should be the same as rating voltage in rating label, otherwise the result of power
consumption will not be accurate--II		 N/A
Perform a Hi-pot testing -II N/A
Application testing and Real function test-S1 PASSED
Disc Size(打磨刀片尺寸) PASSED
Pull testing(60N) for Power cord test. -S2 FAILED
Serial no（此批产品的序列号） N/A
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2<

preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

Menu
x