Service Details
- Home
- Service Details
Most of the microwave ovens are mostly made in Foshan Guangdong, or Ningbo Zhejiang etc. For such electrical appliance inspections as microwave, the onsite quality inspection checklist will be as below.
The types of microwave oven QC check inspections are mostly as follows:
Please find below for an example of the microwave oven check points for onsite test:
CHECK LIST | COMMENTS | RESULT |
---|---|---|
Test all detailed functions according the instruction manual of the item's box.-II | PASSED | |
Test the function of the turntray, if test model has a turntray.-II | PASSED | |
Check the power usage (ie.: wattage).-S2 | N/A | |
Perform a Hi-pot test.-II According to UL2111 or EN60335-1: UL2111 - Less than 250v operated motors 0.5hp or less->1000V for 60S. ............ EN60335-1 ........... Take clear pictures for following information: AC/DC socket, Requested voltage and calibration labe |
FAILED | |
Perform a stability test -S2 Perform the test on a surface inclined 10 degrees. please take clear picture to show that the product is in the most unfavourable position on the inclined plane. |
PASSED | |
Perform an earth continuity test if applicable. -II The result of test should be <0.1ohm. |
PASSED | |
Perform a pull test for power cord-S1 pull on the cord for 25time in 1 minute. If the product has a net weight</=1kg, use a force of 30N. If the product has a net weight 1kg>, </=4kgs, use a force of 60N, If the product has a net weight >4kgs, use a force of 100N- The cord should not be displaced more than 2mm. Noted: Before starting the test, you should pull the cord several times to make sure that no rolled cord inside the product. |
PASSED | |
Perform a microwave radiation emission test.-II The result should be less than 5mw/cm2 at any point 5mm from microwave. |
PASSED | |
Check the design of product to see effect.-S1 If the door is open, the magnetron can't work. |
PASSED | |
Perform an internal check.-S1 According to the BOM provided by client. a/ take all related picture to show each main component and prepare a list of them. b/ Check and show the quality of welding. c/ If the earth pin or any pin is not cinnected to wire; fail the test and put important remark. |
PASSED | |
Check the temperature at the minimum and maximum settings.-S1 Record the actual results |
PASSED | |
Perform a fatigue test for door and all adjustable parts.-S2 20 movements |
PASSED | |
Perform a life/endurance test for functions other than microwave.-S1 No overheating or other problem observed. |
PASSED |
China microwave oven third party factory inspection services, microwave oven third party factory inspection services in China, microwave oven third party factory inspection services, microwave oven 3rd party factory inspection, microwave oven factory inspection services, microwave oven factory inspection services in China, microwave oven 3rd party factory inspection in China, China microwave oven factory inspection, China microwave oven 3rd party factory inspection, microwave oven third party factory inspection in China, microwave oven 3rd party factory inspection services in China, microwave oven factory inspection in China, China microwave oven 3rd party factory inspection services, China microwave oven factory inspection services, microwave oven third party factory inspection, microwave oven 3rd party factory inspection services, China microwave oven third party factory inspection
3rd party preshipment products goods onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.