Service Details
- Home
- Service Details
How to do Quality Pre-shipment Inspections for Power Tools?
The onsite quality check for power tools we have:
The quality inspections for power tools will be like below:
INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
No load speed:—S2 | PASSED | |
Perform an internal check.- Internal check: take a photo to show all that the item contains All the components specified by the client. need to write down the marking on all critical components-All Internal wiring should be routed to provide sufficient creep age and clearance distances and to so as to avoid damage to the insulation. All screws should be found, they should be fully tightened and with no damage to the screw heads. request at least one picture to show the whole construction of product-S1 |
PASSED | |
Power consumption test-The voltage input should be the same as rating voltage in rating label, otherwise the result of power consumption will not be accurate--II |
PASSED | |
Perform a barcode –scanning test .The barcode should be scannable and have the correct number for all barcode label. (-S3) | PASSED | |
Check if the base of the item wobbles by placing it on a flat, glass surface--II | PASSED | |
PLUG& Power Cord view-S2 | N/A | |
perform quantity and assortment check in each package--S1 | PASSED | |
Run the test work for 4 hour ----S2 | N/A | |
Perform an assembly test. | N/A | |
Perform a Hi-pot testing -II | PASSED | |
Disc Size | PASSED | |
Perform a fatigue test for all adjustable parts: Do this 20 times for assemble and sand paper on tool head – There should be no damage to the item. ----S2 |
PASSED | |
Smell check-check if there are any strong offensive odor-II | FAILED | |
Power cable Size 4m for all item-S2 | N/A | |
Pull testing(60N) for Power cord test. -S2 | PASSED | |
Leakage current test--II | N/A | |
.Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces) The Carton should fall down At 61cm height without damage-S1 |
N/A | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | PASSED | |
Other test | FAILED | |
Perform the standard power test-II. | FAILED | |
Perform a normal function test. .-II | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling. | FAILED | |
Serial no | FAILED | |
Perform a strength check.-Test all connections using normal force.-II | FAILED | |
Perform a voltage range test -II | PASSED |
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.