Lang

Service Details

  • Home
  • Service Details

Shunde Foshan Inspections: Furniture Sofa Cabinet Office Chair Rattan Bed Wheel Patio Park Bench Freezer Cooler Refrigerator fridge Icebox Gas stove Couch Foshan Shunde:

Shunde Foshan is thriving with its furniture industry, WeCheck CTS offer furniture pre-shipment quality inspection in the area, and there are below types of inspections we do:

The QC inspections will check:

  • Aesthetic, visual defects, workmanship, surface and function check
  • Labels, markings, logos & barcodes check
  • Packaging, safety and drop tests
  • On-site safety, regulation & function testing
  • Product specs, and special requirements check
  • Measurements & sizes check
  • Quantity & assortment verifying
Shunde Foshan Inspections

An example of the on-site Tests during the furniture Quality inspections:

CHECK LIST COMMENTS RESULT
Assembly check
- Follow product instruction and ease for assembly- 2pcs per item		 PASSED 
Humidity check-S1
-Check 3 points per pc and take the average data :(a+b+c)/3.
For indoor products shall be within 7%-12%;
For outdoor products shall be within 8%-14%		 PASSED 
Static loading test for chair-S1
- 300lbs per seating for 1 hour. No obvious deformation		 N/A 
Stability test- 2pcs per item
- Put unit onto a 10 degree incline, and rotate 360° slowly, cannot tip over.		 FAILED
Wobble test-II
- Place samples onto a flat glass surface, no wobble.		 PASSED
Finger Entrapment (if applicable).-S1
- The acceptable safety space should smaller than 1/4 inch or bigger than 1/2 inch. Then the finger will not be harmed.		 PASSED
Leg Strength (Front / Side).- S1
- 75 lbs. applied to the leg at 1 In. From the end of the leg. Force is applied in four directions (forward, rearward, side and side).		 PASSED
Durability Of Folding Mechanism (If Applicable)-S1
- The chair shall be opened and closed as intended for 3 cycles.		 PASSED
All accessories check-II
- Based on parts list on instruction sheet, no missing.		 PASSED
Carton drop test- 1 carton each item
One corner, three edges, six sides, at height of
30inch (﹤9.5kg)
24inch (9.5kg～18.6kg)
18inch (18.6kg～27.7kg)
12inch (27.7kg～45.3kg)
8inch (45.3kg～68kg) on the cement floor		 PASSED
Loading check-S1
- Test load is applied distributed on the surface. Test load based on sq. ft. not to exceed 200 lbs.
> 4 sq. ft., 10lbs. / sq. ft.;
< 4sq. ft., 20lbs. / sq. ft.
Max. 1/4 in deformation or no malfunction in any component		 PASSED
Stability test-S1
- Test load is applied 1 In. from the edge on 12 In. disc.
> 4 sq. ft., 50lbs.
< 4sq. ft., 40lbs.
Max. 1/4 in deformation or no malfunction in any component.		 PASSED

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x