English
Deutsch
Português
中文
WECHECK CTS CO LTD
Service Details
- Home
- Service Details
The furniture products like cabinets, are mostly made of MDF (medium density fiberboard), and some of them are of metal (steel file cabinets, aluminium cabinets etc.). The pre-shipment inspections for cabinets will check:
The 3rd party inspection services are mostly as below:
Please find below for an example of an on-site inspetion checklist for cabinets:
| ONSITE INSPECTION LIST | COMMENTS | RESULT |
|---|---|---|
| Test the strength of the seams by hand—II | PASSED | |
| If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | PASSED | |
| Perform a static loading test: - 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities |
PASSED | |
| Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED | |
| Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
| Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 |
FAILED | |
| Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 | N/A | |
| Perform a function test –II | PASSED | |
| Perform assembly test according the manual instruction step by step.-S2 | FAILED | |
| Perform a static loading test*- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities | PASSED | |
| Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) |
PASSED | |
| Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
| Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
| Perform a function test –II | PASSED | |
| Test the strength of the seams by hand—II | N/A | |
| Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) | PASSED | |
| If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | PASSED | |
| Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED |
Shunde cabinet third party quality control services, Shunde cabinet quality control services, Shunde cabinet 3rd party quality control, third partycabinet quality control in Shunde, Shunde cabinet 3rd party quality control services, Shunde cabinet third party quality control, 3rd partycabinet quality control in Shunde, cabinet quality control in Shunde
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.