Service Details
- Home
- Service Details
The preshipment inspections for routers will verify if they work properly and the order/ product specifications are met:
Normally for this kind of QC check inspections of routers, it would be final inspections, but we also have:
An example of router onsite quality inspections fyi:
ON-SITE INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
Record data of the inspected sample - b.1 Write down in the report S/N of the inspected sample. - b.2 Take snapshots of the defects detected |
PASSED | |
The DUT passes the test. If something is wrong it is recommended to turn-off the DUT and to repeat the test again. | PASSED | |
Test DUT following the document. Inspector requires the herein material specified. During Test, inspector is asked to check leds. These must light perfectly. Every DUT must use their own power supply and antennas. Plastic cover has to be placed on DUT |
PASSED | |
Perform wobble test, put the unit on the flat surface ,the unit should not tip or wobble during the test | PASSED | |
Check colors, sizes, weight, logo, CD and documents only on ONE product - c.1 Check colors, sizes, weight, logo - c.2 Check CD - c.3 Check Packing List and Disclaimer |
N/A | |
Error must be documented with snapshots. S/N must be recorded | N/A | |
S/N for the inspected sample are written down in the our report - b.2 Capture images and record S/N of the faulty products for solving them |
PASSED | |
Product internal visual inspection - f.1 Indoor cleaning. Once the DUT is opened, the inspector has to check the board - f.2 The inspector has to check the board components - f.3 Screws. The inspector will review the screwing of the sample |
N/A | |
Take snapshots of ALL pallets and of the Products in the show room | PASSED | |
- c.1 Colors, sizes and weights matches the criteria defined - c.2 CD shows Teldat artwork when box is opened. It is shipped in a paper bag. CD has no visible scratch on any side. - c.3 Documents are neatly printed. Margins are OK. Paper has no marks, no dirt and they are not broken. |
FAILED | |
Perform a function test. All inspection procedures and specifications will according to client's requirement included: golden sample, packing requirement, Product specification, Inspection Protocol, Instruction manual, etc a. Power on/off test 5 times; b. LED/LCD/VFD display and LED indicator check; c. All input/output socket function |
PASSED | |
Collect report data. Once finished all the tests and validations the inspector has to send the Test recorded data to Teldat. Test Result Recording issue is documented in Testing.pdf | FAILED | |
Perform hi-pot test if applicable | FAILED | |
Internal workmanship check | PASSED | |
Perform quantity and assortment check for all component (S2) | FAILED | |
Perform remote control test -check the distance for the remote(S2) | PASSED |
WIFI router 3rd party pre-shipment inspection, China WIFI router pre-shipment inspection, China WIFI router 3rd party pre-shipment inspection services, WIFI router 3rd party pre-shipment inspection services in China, WIFI router third party pre-shipment inspection services, China WIFI router 3rd party pre-shipment inspection, China WIFI router third party pre-shipment inspection services, WIFI router pre-shipment inspection services, China WIFI router pre-shipment inspection services, WIFI router pre-shipment inspection services in China, WIFI router third party pre-shipment inspection, WIFI router 3rd party pre-shipment inspection services, China WIFI router third party pre-shipment inspection, WIFI router third party pre-shipment inspection in China, WIFI router third party pre-shipment inspection services in China, WIFI router 3rd party pre-shipment inspection in China
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.