Service Details
- Home
- Service Details
For coffee cup inspections, the checks will normally be for visual defects, and decal quality, we will also check the packing, gift box printing etc as below:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
A. Quantity check | OK | |
B. Shipping marks & packing | OK | |
C. Labels, logos and colors | OK | |
D. Styles & measurements | OK | |
E. Onsite safety and function tests | NOT OK | |
F. Special requirements | OK | |
G. AQL workmanship (Visual inspections) |
OK |
The on-site QC inspections for coffee cups are mostly as below:
As an example of a pre-shipment inspection for coffee cups in-line tests:
ON-SITE INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
Lab certified.(询问工厂提供相关测试证书如SGS) | PASSED | |
Smell check-check if there are any strong offensive odor-II | PASSED | |
Leakage water test for hot water and cold water-S4 | PASSED | |
Make sure the logo are correct positioned conform Image(不同角度的全景) |
N/A | |
Capacity check -S1容量测试 根据客人不同产品要求,对应容量测试 --陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml --Motta Milk Pitcher Volume: 750ml --Italian Expresso Jug Volume: 70ml |
FAILED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order) |
PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 | N/A | |
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) | PASSED | |
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) | PASSED | |
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | PASSED | |
Scan test for barcode label | PASSED |
Yiwu coffee cup third party factory inspection services, Yiwu coffee cup factory inspection services, Yiwu coffee cup third party factory inspection, third partycoffee cup factory inspection in Yiwu, 3rd partycoffee cup factory inspection in Yiwu, Yiwu coffee cup 3rd party factory inspection services, Yiwu coffee cup 3rd party factory inspection, coffee cup factory inspection in Yiwu
3rd party preshipment products goods onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.