Lang

Service Details

  • Home
  • Service Details

Shunde cabinet inspector:

The furniture products like cabinets, are mostly made of MDF (medium density fiberboard), and some of them are of metal (steel file cabinets, aluminium cabinets etc.). The pre-shipment inspections for cabinets will check:

  • Packaging, safety and drop tests onsite
  • Product specs, and special requirements checks
  • Quantity & assortment verifications
  • Aesthetic, visual defects, workmanship, surface and function inspections
  • Labels, markings, logos & barcodes QC inspections
  • Measurements & sizes inspections
  • On-site safety, regulation & function tests

The 3rd party inspection services are mostly as below:

Shunde cabinet inspector

Please find below for an example of an on-site inspetion checklist for cabinets:

ONSITE INSPECTION LIST COMMENTS RESULT
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 PASSED
Perform a function test –II PASSED
Perform assembly test according the manual instruction step by step.-S2 N/A
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 FAILED
Test the strength of the seams by hand—II FAILED
Test the strength of the seams by hand—II PASSED
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) PASSED
Perform moisture content test
–(Check the moisture content of all wooden parts.
- Check 3 points per piece and take the average data: (a+b+c)/3
- The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2)		 N/A
Perform a function test –II FAILED
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II N/A
Perform assembly test according the manual instruction step by step.-S2 FAILED
Perform a static loading test:
- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges
- There should be no obvious deformities		 PASSED
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 N/A
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 PASSED
Perform a stability test.
-For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1		 FAILED
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II PASSED
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 PASSED
Perform a static loading test*- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities N/A

Shunde cabinet 3rd party inspector services, Shunde cabinet inspector services, Shunde cabinet third party inspector services, Shunde cabinet third party inspector, 3rd partycabinet inspector in Shunde, cabinet inspector in Shunde, Shunde cabinet 3rd party inspector, third partycabinet inspector in Shunde

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x