Service Details
- Home
- Service Details
The furniture products like cabinets, are mostly made of MDF (medium density fiberboard), and some of them are of metal (steel file cabinets, aluminium cabinets etc.). The pre-shipment inspections for cabinets will check:
The 3rd party inspection services are mostly as below:
Please find below for an example of an on-site inspetion checklist for cabinets:
INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | FAILED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) | PASSED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) |
PASSED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Test the strength of the seams by hand—II | PASSED | |
Perform a function test –II | PASSED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 |
PASSED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Test the strength of the seams by hand—II | N/A | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | PASSED | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | FAILED | |
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | FAILED | |
Perform a function test –II | PASSED | |
Perform a static loading test: - 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities |
PASSED | |
Perform a static loading test*- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities | PASSED | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 | N/A |
Shunde cabinet 3rd party inspection services, cabinet 3rd party inspection in Shunde, Shunde cabinet 3rd party inspection, 3rd partycabinet 3rd party inspection in Shunde, third partycabinet 3rd party inspection in Shunde, Shunde cabinet third party inspection services, Shunde cabinet 3rd party inspection services, Shunde cabinet third party inspection
preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.